How to Configure VTP - VLAN Trunking Protocol - Lab
- Create the following VLAN's on switch Switch-- 1
- VLAN 10: name India
- VLAN 20: name USA
- VLAN 30: name Newyork
- Configure the interfaces between the switches as trunks.
- Configure switch Switch--1 to be the VTP server.
- Configure switch Switch--3 to be a VTP client.
- Configure switch Switch--2 so it does not synchronize itself to the lastest VTP information, it should forward advertisements to switch Switch-3 though.
- Change the VTP domain name to “PGRspot”.
- Use the password “PGR” for VTP.
- Remove the password from Client and make sure Server and Client does not synchronize by creating Vlan 200 : Test 200
- Configure Vlan 300 in Transparent mode Switch and confirm that the created VLAN is only Locally Known.
- Make Sure Vlan created in Transparent mode are shown in running-config.
Scenario:
Solution Video:
Post a Comment
Post a Comment