How to Configure VLAN and DTP
- Create the following VLAN's and configure the correct names:
- VLAN 10: name India
- VLAN 20: name USA
- VLAN 30: name Newyork
- VLAN 40: name France
- VLAN 50: name Netherland
- Configure fa0/24 on Switch-1 as an access interface in VLAN 10.
- Configure fa0/24 on Switch-2 as an access interface in VLAN 20.
- Configure fa0/24 on Switch-3 as an access interface in VLAN 10.
- link between Switch2 and Switch3 is not allowed to dynamically negotiate a trunking protocol.
- Only VLAN 1,10 and VLAN 20 are allowed between Switch-1 and Switch-2.
- Only VLAN 1,10,20 and 50 are allowed between Switch-2 and Switch-3.
- The native VLAN between Switch1 and Switch3 should be VLAN 50.
- Assign IP any IP address to the PC and try to reach from Switch-1 PC to Switch-3 PC.
Solution Video:
That's it
Post a Comment
Post a Comment